Attacks/Actions per melee round for unequal combatants

Ley Line walkers, Juicers, Coalition Troops, Samas, Tolkeen, & The Federation Of Magic. Come together here to discuss all things Rifts®.

Moderators: Immortals, Supreme Beings, Old Ones

jburkett
Wanderer
Posts: 56
Joined: Tue Jul 17, 2018 8:44 pm

Attacks/Actions per melee round for unequal combatants

Unread post by jburkett »

Has anyone tried an alternate way of distributing attacks/actions during a melee round for combatants who have a different number of attacks/actions? Under the combat rules in RUE, if you have a character with 6 attacks/actions vs a character or NPC with 4 attacks actions each will attack and counter attack, etc for the first four actions of the round until the character with 4 attacks/actions at the same rate. Then, the character with 6 attacks/actions gets to use the remaining 2 attacks/actions at the end of the round and the character with 4 can only defend (parry or dodge). So, (back to my question) has anyone tried a different distribution where, for example, the character with 4 attacks action are more equally distributed through out the 15 second melee? I guess I just find it odd that a character with 4 attacks/actions can use them at the same rate as a character with 6 during the first part of the melee round. I don't think this would be hard to figure out especially if you use graph paper to determine your initiative and attacks distribution for two or more characters during the round. The 15 second round would be divided into a number of segments equal to the number of attacks/actions for the character with the most attacks/actions. In the example above, that would be 6. Then, the other characters' attacks would be equally distributed (as much as possible) across those segments. For the 6 vs 4 example, it the character with 6 attacks/actions has initiative, then the character with 4 could counter attack against attack 1, 2, 4, & 6. They could still parry or dodge at 3 & 5 (but, they would forfeit next attack if they dodge as per rules). 7 vs 4 would allow the character with 4 attacks to counter at 1, 3, 5, & 7. And, 5 vs 4 would allow the character with 4 attacks/actions to counter at 1,2,4,& 5. Anyhoo, I hope this makes sense. Please let me know if you think this might work or if you see it as upsetting the balance in combat. Thanks for your input!
User avatar
BuzzardB
Explorer
Posts: 144
Joined: Thu May 09, 2013 2:10 pm

Re: Attacks/Actions per melee round for unequal combatants

Unread post by BuzzardB »

I have tried a few one-offs with various actions/melee distribution, both from suggestions on this forum and elsewhere.
The two options I have ended up liking the most are polar opposites in complexity.
First is the alternate Initiative rules from temporal-nexus.net (which seems to be down as of posting this) where the initiative roll is divided by the number of actions you get then places on a chart in those increments. So if Johann rolls an initiative of 12 and has for actions/melee then he gets his actions on initiative 12, 9, 6 and 3. [12 / 4 = 3, so 3 increments apart].

The second, and smoothest, method was that everyone has 5 attacks/melee.
User avatar
Incriptus
Hero
Posts: 1257
Joined: Mon Dec 23, 2002 2:01 am
Comment: Hey, relaaaax. Pretend it's a game. Maybe it'll even be fun
Shoot the tubes, Dogmeat!
Location: Washington State

Re: Attacks/Actions per melee round for unequal combatants

Unread post by Incriptus »

I do find the "Extra Attacks at the end" to be easy, and best described as watching a wrestling match where the two characters are exchanging punches till the the guy with the most attacks per melee ends with a number of unanswered attacks.



My most recent experiment was the 5 phase melee round. Where you get any attacks over number 5 as an extra attack in descending phases.

I.E. if you have 8 attacks

Phase 1: 1 attack
Phase 2: 1 attack
Phase 3: 2 Attacks
Phase 4: 2 Attacks
Phase 5: 2 Attacks

----

In Effect it comes down to how much of an advantage do you want the extra attacks to be

By Placing the Extra attacks earlier in the melee round you increase there value. Since having 12 attacks is less useful in a fight that only lasts for 5 attacks. By redistributing those attacks you give the guy with more attacks an even bigger advantage.


Ultimately I ended up dropping it because of the extra "paper work"
Eagle
Dungeon Crawler
Posts: 323
Joined: Fri Aug 21, 2015 4:31 pm

Re: Attacks/Actions per melee round for unequal combatants

Unread post by Eagle »

Take a look at the Hero System and their Speed Chart. They use a 12 second combat round, but they break it up exactly as you're describing. 12 seconds in a turn, and 12 "phases". So somebody with 4 attacks per round (Speed 4 in Hero) goes on phase 3, 6, 9, and 12. Somebody with 5 attacks goes on 3, 5, 8, 10, and 12. 6 attacks mean you go on 2, 4, 6, 8, 10, and 12.

If you want to reproduce that effect, you could use their chart. There's no real need to tie each phase to one second of game time, and Rifts characters usually don't go above 8 or 9 attacks a round, so you really wouldn't need to modify it.
User avatar
Vincent Takeda
Dungeon Crawler
Posts: 224
Joined: Sun Jan 04, 2015 2:16 pm
Comment: 44 years in denver, but now in grand rapids.
Location: Rifts Denmark

Re: Attacks/Actions per melee round for unequal combatants

Unread post by Vincent Takeda »

I've changed how I handle attacks fundamentally. Everyone only gets one attack per round and a round is 2 seconds. Any time a character would normally get an extra attack per round, instead I give them an initiative bonus. Everyone rolls for initiative, then only the winner goes. Then everyone rolls for initiative again. Much less to keep track of, and much more exciting in terms of not knowing who's gonna get in the next shot.
User avatar
eliakon
Palladin
Posts: 9093
Joined: Sat Jul 14, 2007 9:40 pm
Comment: Palladium Books Canon is set solely by Kevin Siembieda, either in person, or by his approval of published material.
Contact:

Re: Attacks/Actions per melee round for unequal combatants

Unread post by eliakon »

In our games (and several of the ones on the chat room) we use what is known as the "5 pass system"
Each round of 15 seconds is divided up into 5 3 second 'passes'
You distribute your actions equally in each pass. With left overs being assigned via dealers choice.
Thus if you have 5 APM you get 1/1/1/1/1. If you have 6 you could have 2/1/1/1/1 or 1/1/1/2/1 or what have you.
When it's your turn you take all the actions in that pass at one time. Thus super fast combatants can make multiple attacks, or power blows or aimed shots or whatever. While super slow combatants might have to skip entire passes.

This allows the speedsters some advantage, with out utterly destroying everyone. AND it also means that they have to make some decisions early instead of simply waiting until the end and then annihilating the weakest people left.

So far it has worked out well.
The rules are not a bludgeon with which to hammer a character into a game. They are a guide to how a group of friends can get together to weave a collective story that entertains everyone involved. We forget that at our peril.

Edmund Burke wrote:The only thing necessary for the triumph of evil is for good men to do nothing."
User avatar
Tiree
Champion
Posts: 2603
Joined: Sun Mar 25, 2001 2:01 am
Comment: Token Right Wing Fascist Totalitarian
"Never hit a man while he's down. Kick them, it's easier" - The Hunt
Location: 25th Member of the "Cabal of 24"
Contact:

Re: Attacks/Actions per melee round for unequal combatants

Unread post by Tiree »

I do a 5 phase set of attacks, with everyone attacks on phase 1. I then even space out the number of attacks, as they grow. So like in the example above for 8 attacks, Phase 1, 3, and 5 will be 2 attacks while 2 and 4 would be 1. If someone has 4 attacks, phase 3 they would not have an action.

Doing this set up, allows multiple action attacks to be start and finish in the same phase. Instead of having to cross multiple phases. This system was borrowed from Champions/Hero System.


Code: Select all

Actions -- Phase 1 -- Phase 2 -- Phase 3 -- Phase 4 -- Phase 5
--- 01 -------- 1 -------- 0 -------- 0 -------- 0 -------- 0
--- 02 -------- 1 -------- 0 -------- 1 -------- 0 -------- 0
--- 03 -------- 1 -------- 0 -------- 1 -------- 0 -------- 1
--- 04 -------- 1 -------- 1 -------- 0 -------- 1 -------- 1
--- 05 -------- 1 -------- 1 -------- 1 -------- 1 -------- 1
--- 06 -------- 1 -------- 1 -------- 2 -------- 1 -------- 1
--- 07 -------- 1 -------- 2 -------- 1 -------- 2 -------- 1
--- 08 -------- 2 -------- 1 -------- 2 -------- 1 -------- 2
--- 09 -------- 2 -------- 2 -------- 1 -------- 2 -------- 2
--- 10 -------- 2 -------- 2 -------- 2 -------- 2 -------- 2
--- 11 -------- 2 -------- 2 -------- 3 -------- 2 -------- 2
--- 12 -------- 2 -------- 3 -------- 2 -------- 3 -------- 2
--- 13 -------- 3 -------- 2 -------- 3 -------- 2 -------- 3
--- 14 -------- 3 -------- 3 -------- 2 -------- 3 -------- 3
--- 15 -------- 3 -------- 3 -------- 3 -------- 3 -------- 3
Last edited by Tiree on Thu Aug 16, 2018 11:01 pm, edited 1 time in total.
jburkett
Wanderer
Posts: 56
Joined: Tue Jul 17, 2018 8:44 pm

Re: Attacks/Actions per melee round for unequal combatants

Unread post by jburkett »

eliakon wrote:In our games (and several of the ones on the chat room) we use what is known as the "5 pass system"
Each round of 15 seconds is divided up into 5 3 second 'passes'
You distribute your actions equally in each pass. With left overs being assigned via dealers choice.
Thus if you have 5 APM you get 1/1/1/1/1. If you have 6 you could have 2/1/1/1/1 or 1/1/1/2/1 or what have you.
When it's your turn you take all the actions in that pass at one time. Thus super fast combatants can make multiple attacks, or power blows or aimed shots or whatever. While super slow combatants might have to skip entire passes.

This allows the speedsters some advantage, with out utterly destroying everyone. AND it also means that they have to make some decisions early instead of simply waiting until the end and then annihilating the weakest people left.

So far it has worked out well.

This system sounds like something I could use. I like the dealer's choice aspect. Thanks!
User avatar
dark brandon
Knight
Posts: 4527
Joined: Thu Aug 14, 2003 10:20 pm
Comment: I want you more when you're afraid of me.
Location: Louisville, KY

Re: Attacks/Actions per melee round for unequal combatants

Unread post by dark brandon »

jburkett wrote:
eliakon wrote:In our games (and several of the ones on the chat room) we use what is known as the "5 pass system"
Each round of 15 seconds is divided up into 5 3 second 'passes'
You distribute your actions equally in each pass. With left overs being assigned via dealers choice.
Thus if you have 5 APM you get 1/1/1/1/1. If you have 6 you could have 2/1/1/1/1 or 1/1/1/2/1 or what have you.
When it's your turn you take all the actions in that pass at one time. Thus super fast combatants can make multiple attacks, or power blows or aimed shots or whatever. While super slow combatants might have to skip entire passes.

This allows the speedsters some advantage, with out utterly destroying everyone. AND it also means that they have to make some decisions early instead of simply waiting until the end and then annihilating the weakest people left.

So far it has worked out well.

This system sounds like something I could use. I like the dealer's choice aspect. Thanks!


We use to do something like this, but instead of 5ths/ we did it in 4ths, and in the case of say 6 apm, it could go 1/1/2/2/, and was back loaded so that if you dodged or used a PA it didn't interrupt flow.
"We're trapped in the belly of this horrible machine And the machine is bleeding to death The sun has fallen down And the billboards are all leering And the flags are all dead at the top of their poles ...I open up my wallet And it's full of blood "~~Godspeed you black emperor.
User avatar
glitterboy2098
Rifts® Trivia Master
Posts: 13536
Joined: Wed Aug 06, 2003 3:37 pm
Location: Missouri
Contact:

Re: Attacks/Actions per melee round for unequal combatants

Unread post by glitterboy2098 »

we tried 6 phases at first, and a few still do, but we settled on 5 because with a melee being 15 seconds, 5 phases results in each phase being 3 seconds, which makes figuring out time based stuff easier.

and one addition to "dealers choice" of note. any attacks not used during the melee are lost, and you can't stack more than one extra attack per phase (or two if you have 10+)

so if you have say 7 attacks, you can do any extra attack per phase twice.. but if you don't use them in the first 4 rounds, you'll only get in 6 attacks that melee, you don't get the make 3 in the last phase.

so juicers and high level robot pilots and others with loads and loads of attacks can be real combat machines still. but at all levels you have to strategize and take risks regarding what you use the attacks for. use your extra's early on for doing damage and you might not have enough for dodging. save extras early for dodging, and you have to start thinking over the risks later when you are running low on phases and still have lots of attacks to use. etc.
Author of Rifts: Deep Frontier (Rifter 70)
Author of Rifts:Scandinavia (current project)
Image
* All fantasy should have a solid base in reality.
* Good sense about trivialities is better than nonsense about things that matter.

-Max Beerbohm
Visit my Website
User avatar
Warshield73
Megaversal® Ambassador
Posts: 5429
Joined: Tue Mar 01, 2011 1:23 am
Comment: "I will not be silenced. I will not submit. I will find the truth and shout it to the world. "
Location: Houston, TX

Re: Attacks/Actions per melee round for unequal combatants

Unread post by Warshield73 »

jburkett wrote:
eliakon wrote:In our games (and several of the ones on the chat room) we use what is known as the "5 pass system"
Each round of 15 seconds is divided up into 5 3 second 'passes'
You distribute your actions equally in each pass. With left overs being assigned via dealers choice.
Thus if you have 5 APM you get 1/1/1/1/1. If you have 6 you could have 2/1/1/1/1 or 1/1/1/2/1 or what have you.
When it's your turn you take all the actions in that pass at one time. Thus super fast combatants can make multiple attacks, or power blows or aimed shots or whatever. While super slow combatants might have to skip entire passes.

This allows the speedsters some advantage, with out utterly destroying everyone. AND it also means that they have to make some decisions early instead of simply waiting until the end and then annihilating the weakest people left.

So far it has worked out well.

This system sounds like something I could use. I like the dealer's choice aspect. Thanks!

I have used a system like this for about 20 years, we call it Base Five.
Each melee is 15 seconds broken into 5 rounds of three seconds each. By making each round three seconds players know how much the can say and our character sheets have how far they can move in each round. For people with more then 5 attacks I give them dealers choice when to take them with one exception, I don't allow 2 attacks on round 1, unless they have 10 or more attacks.

I like this system because it keeps people involved, there turn comes around about every minute or two, but it also gives OCCs like Juicers a huge advantage.

I have had some friends try to do 3, 4, or even 6 phases and others do Base X which is the lowest number of attacks being the base. I just find it is more organized for it to be five rounds each time.
“If I owned Texas and Hell, I would rent out Texas and live in Hell”

- General Philip Henry Sheridan, U.S. Army 1865
User avatar
SpiritInterface
Hero
Posts: 887
Joined: Sat Oct 15, 2005 9:48 pm
Location: Visalia, CA

Re: Attacks/Actions per melee round for unequal combatants

Unread post by SpiritInterface »

We tried a grid with 1-45 across the top and the Characters down the side. Then rolled initiatives, and divide your roll by the number of actions and that is the interval at which you got your actions.

As a example; if you had 6 actions and your total initiative was an 18 after adds. your first action would happen on 18, the next on 15, then 12, 9, 6, and last action on 3. If the interval didn't work out evenly the short intervals were put into the middle.

It got real interesting when you had high initiative, high action characters along with low initiative, low action characters. Or low initiative, high action and high initiative, low action characters.
Veni Vidi Vici
Una Salus Victis Nullam Sperare Salutem
Sic vis pacem, Para bellum
Audentes fortuna iuvat
O Tolmon Nika
Oderint Dum Metuant
shadrak
Champion
Posts: 1831
Joined: Wed May 24, 2006 8:11 pm
Location: Bloomington, IL

Re: Attacks/Actions per melee round for unequal combatants

Unread post by shadrak »

I create a system of "free/extra" attacks based on the lowest number of attacks in the interaction.

So, if I had 5 players and NPCs:
Player 1 = 7 attacks
Player 2 = 6 attacks
NPC 1 = 5 attacks
NPC 2 = 4 attacks
NPC 3 = 4 attacks....

I would play each melee round as a 4 attack melee round with the players with additional attacks able to do 2 attacks at some point during the combat...

This would allow them to aim/shoot or power punch/leap kick in a single action.

Generally, players tend to take their additional action immediately in the round which is how I would recommend it rather than taking 3 or 4 actions at the end of the round...

That is Player 1 has 7 melee actions and Player 2 has 4 melee actions with Player 1 having the initiative...

Player 1 dives for cover (1 action) and takes a wild shot (1 action) (2 of 7)
Player 2 dives for cover (1 action) (1 of 4)
Player 1 makes and aimed, called shot at player 2 who is now behind cover (3 actions) 5 of 7
Player 2 aims at player 1 (1 action) 2 of 4
Player 1 aims at player 2 (1 action) 6 of 7
Player 2 calls his shot (1 action) 3 of 4
Player 1 shoots (1 action) 7 of 7
Player 2 shoots (1 action) 4 of 4
Post Reply

Return to “Rifts®”